Engineering Services
Comprehensive compliance, testing and certification services for Australia's heavy machinery and access equipment.
Inspections
5-Year Major Inspection
The mandated five-yearly structural strip-down and recertification that returns an ageing EWP to a known, documented condition.
Annual Inspection
The yearly competent-person inspection that keeps an EWP legally on the tools between major inspections.
Boom Inspection
Focused examination of boom sections, welds, wear pads and pivots that carry the highest stresses on a machine.
Chassis Inspection
Examination of the chassis, outriggers and mounting structure that provide the stable base for lifting and elevation.
Hydraulic System Inspection
Examination of cylinders, holding valves, hoses and pressures that must hold a boom safely in position under load.
Crane Inspection
Periodic competent-person inspection of cranes to the AS 2550 series, keeping lifting appliances safe and compliant.
Crane Major Inspection
The overhaul-level structural inspection and recertification that returns an ageing crane to a known, documented condition.
Pre-Purchase Inspection
Independent assessment of a used machine's condition, compliance and history before you commit to buying it.
Scissor Lift Inspection
Competent-person inspection of scissor lifts, focused on the scissor stack, platform and stability systems.
Telehandler Inspection
Competent-person inspection of telehandlers, covering the telescopic boom, attachments, load charts and stability systems.
Compliance
EWP Certification
Independent certification confirming an elevated work platform meets its design standard and is compliant for use.
Log Book Servicing
Scheduled servicing recorded in the machine's log book to maintain the continuous history compliance depends on.
Fleet Compliance Audit
A whole-of-fleet review of inspection currency, documentation and compliance status across every machine an operator holds.
Compliance Plates
Assessment and reinstatement of the rating and identification plates that make a machine legally identifiable and rated.
Risk Assessment
Structured identification of hazards and controls for EWP and crane operations, supporting WHS compliance and safe work.
Engineering
Engineering Report
A signed, defensible engineering assessment of a machine's condition, compliance or fitness for a specific purpose.
Structural Assessment
Engineering evaluation of a machine's structural integrity, fatigue condition and fitness to continue in service.
Incident & Failure Investigation
Independent engineering investigation to establish the root cause of an incident or component failure.
Design Verification
Independent confirmation that a machine or modification conforms to its design standard and sound engineering principles.
NDT
Non-Destructive Testing (NDT)
A suite of non-destructive methods that find cracks and defects in structure and welds without damaging the machine.
Ultrasonic Testing
High-frequency sound used to detect internal flaws and measure remaining wall thickness in structural members and welds.
Eddy Current Testing
Induced electrical currents used to detect surface and near-surface flaws, often without removing coatings.
Magnetic Particle Testing
Magnetic fields and fine particles used to reveal surface and near-surface cracks in steel welds and components.
Dye Penetrant Testing
A penetrating dye that reveals surface-breaking cracks in any non-porous material, including aluminium.
Visual Weld Inspection
Systematic examination of welds for profile, defects and workmanship, forming the first line of structural assessment.
Testing
Load Testing
Controlled application of test loads to verify that a machine performs safely at and beyond its rated capacity.
Proof Load Testing
Application of a load above rated capacity to demonstrate structural margin, followed by re-examination for damage.
Functional Testing
Systematic verification that every control, interlock and safety system operates and intervenes exactly as designed.
Electrical Insulation Testing
Verification of the dielectric integrity of insulated EWPs so operators are protected when working near live conductors.
Dielectric Testing
Application of controlled test voltages to measure the insulating performance of EWP booms and components.
Ready to ensure your equipment is compliant?
Book an inspection today or contact our engineering team for specialized testing and compliance advice.